27
Service Diagnostics and Procedures
© 2011 Viking Preferred Service
Light Transformer (continued)
4. Disconnect wiring and remove screws and
transformer.
5. Reverse procedure to reassemble.
Verify 120 VAC to the transformer. If voltage is not
available, verify input to terminal block and output
from the terminal block to the transformer. Output
voltage from the transformer should be 2.5 VAC.
Note
: VGIQ410-3RE2 model shown
Screws
Cover
Light Transformer
Screw
L1 Red
N White
Black/Red
(to LED Lights)
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect gas supply and electrical power to unit
before servicing. After servicing, reconnect electrical power and gas supply.
