1
PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
S E C U R I T Y & C O M M U N I C A T I O N S O L U T I O N S
1600-IP Series
ADA Compliant VoIP
Emergency Phones
May 20, 2019
VIKING
Features
Applications
Specifications
www.VikingElectronics.com
ADA & CE Compliant VoIP Emergency Phones
with Built-In Dialer and Digital Voice Announcer
• Automatic polling and programming software included
• 2 Amp relay contacts for door/gate or SL-2 strobe light control
• SIP compliant
(see pg 2 for list of compatible IP-PBX phone systems)\
• Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
• PoE powered (class 1, <4 watts)
• Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
• VoIP eliminates the need for “Push to Talk” mode
• Network downloadable firmware
• Meets ADA requirements for Emergency Phones:
- Automatically lights the Red “Call Connected” LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
• Non-volatile digital voice announcer with 28 seconds of voice memory
• Handsfree operation
• Marine grade 316 stainless steel prevents corrosion on the stainless steel models
• Laser etched graphics on stainless steel models
• Dials up to 5 emergency numbers
•
E-1600-20-IP
,
E-1600-22-IP, E-1600-52-IP,
and
E-1600-TP2IPEWP
dial up to 5 non-
emergency “INFO” numbers
• Cycles through backup phone numbers on busy or no-answer
• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66
Ingress Protection Rating, see
DOD 859
• Hangs up on busy signal, time-out or touch tone command
• Extended temperature range (-40°F to 140°F)
• 11 different chassis or board only available
• Available in 42” tower phone model
E-1600-BLTIPEWP
(
DOD 249
)
• Optional
LV-1K
Line verification Panel (
DOD 246
)
• Optional
PB-100
Polling System available (
DOD 232
)
• Optional
SL-2
or
BLK-4-EWP
strobe light kit available (
DOD 242/654
)
• Optional
E-1600A-MK-GNP
Pedestal Mounting Kit (
DOD 227
)
• Optional
PB-1
Panic Button Kit (
DOD 233
)
• Diagnostics
(for testing mic, speaker & relay)
Power:
PoE class 1 (<4 watts)
Maximum Sound Pressure:
95 dB SPL @ 1m.
Dimensions:
See Installation and Specifications
Operating Temperature:
-40°F to 140°F (-40° C to 60° C)
Humidity - Standard Products:
5% to 95% non-condensing
Humidity - EWP Products:
Up to 100%
Audio Codecs:
G711u, G711a, G722
Network Compliance:
IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with
auto cross over
Regulatory Compliance:
CE, FCC Part 15 and Canada ICES-003 Class A
Connections:
(1) RJ45 10/100 Base-T, (3) gel-filled butt connectors
* Americans with Disabilities Act of 1992 contains federal regu-
lations regarding elevator telephones (Public Law 101-336).
• Elevators
• Parking ramps/lots
• Emergency pool phones
• ATM machines
• Medical centers
• Silent hold-up alarm dialer
with an optional
PB-1
Panic
Button Kit (
DOD 233
)
The
1600-IP Series
ADA Compliant VoIP Emergency Phones are designed to
provide quick and reliable handsfree communication for SIP VoIP phone sys-
tems with PoE. All
1600-IP Series
phones meet ADA requirements for eleva-
tor/ emergency telephones, and can be programmed from any Touch Tone
phone or PC on the same LAN or remotely using a static IP address. The
phones can dial up to 5 programmable emergency numbers. In addition, the
E-1600-20-IP, E-1600-22-IP
,
E-1600-52-IP
and
E-1600-TP2IPEWP
feature a
second "
INFO
" button that will dial up to 5 non-emergency numbers. Two amp
relay contacts are provided for strobe light, camera, door/gate control, etc.
The
1600-IP Series
phones can be programmed to automatically deliver a
digital announcement to identify the location of the emergency call.
Alternatively, a DTMF Touch Tone code may also be delivered. A “Call
Connected” LED can be initiated manually or automatically. All programming
parameters, including phone numbers and location numbers, are stored in non-
volatile memory, requiring no batteries. All units are PoE powered.
For outdoor installations where the unit is exposed to precipitation or
condensation, select
1600-IP Series
phones are available with Enhanced
Weather Protection (
EWP
). EWP products feature foam rubber gaskets,
sealed connections, gel-filled butt connectors, as well as urethane or thermal
plastic potted circuit boards. For more information, see
DOD 859
.
Installation requires the assistance of a Network Administrator / IT Technician.
• Area of refuge locations
• Lobbies
• Entryways
• Campus emergency stations
• Stadiums
• Convention centers
• Public access areas
!
E-1600-IP E-1600-45-IP E-1600-60-IP E-1600-65-IP
E-1600-20-IP E-1600-22-IP
E-1600-30-IP E-1600-32-IP
E-1600-50/52-IP
E-1600-53-IP
E-1600-55-IP E-1600-03-IP
E-1600-02-IP/E-1600-TP-IPEWP
E-1600-TP2IPEWP/E-1600-GT-IPEWP
