background image

1. Pull the hookswitch tab in the handset cradle.
2. Rotate the hookswitch tab 180 degrees.
3. Reinsert the hookswitch tab.

The hookswitch tab has a lip which allows the handset to
stay on-hook when the IP phone is mounted vertically.

To adjust the hookswitch tab: 

Adjust the hookswitch tab as shown below(

Take a  

SIP-T21P IP phone as an example

): 

Wall Mount Quick Installation Guide

for SIP-T23_T22_T21_T20_T19 IP Phones

This quick installation guide provides step-by-step 
instructions for mounting your IP phone to a wall.

SIP-T19(P) IP Phone

www.yealink.com

Wall mount is avaliable for the following IP phones:

SIP-T22(P) IP Phone

Wall Mount Quick Installation Guide

180。

Adjusting the Hookswitch Tab

The IP phone is packaged with the hookswitch tab in

desk mount position. Before mounting the IP phone to

a wall, you must set the hookswitch tab to wall mount 

position.

SIP-T21(P) IP Phone

SIP-T20(P) IP Phone

Depending on which model you own, your IP phone can

be mounted to the wall in one of two ways:

By using the stand(included with SIP-T23P/T23G/T22(P)

/T21(P)/T21(P) E2 /T20(P) IP phone)

By using the slots on the back of the phone

(for SIP-T19(P)/T19(P) E2 IP phone)

Screws, wall anchors and applicable tools are also 

required for wallmount installation. These are not 

included with your IP phones. You need to purchase 

them separately.

SIP-T23P/G IP Phone

SIP-T21(P) E2 IP Phone

SIP-T19(P) E2 IP Phone

Отзывы: