VIKING TECHNICAL SUPPORT 1.800.908.0884
3 0
Radio Receiver (Typical)
!
IMPORTANT:
The Hold Open “Timer” setting (page 25) affects how the gate will
respond to the radio receiver command.
ACCESSORY CONNECTIONS
The control board provides two modes
of operation that a radio receiver can
control the gate:
1. Open-Stop-Close
By having the radio receiver connected
as illustrated and with the “Timer” OFF
(see page 25):
Every command of the radio transmitter
will control the gate as follows:
a. First command opens the gate,
b. Second command stops the gate and
c. Third command closes the gate
d. Any subsequent commands will
continue in the same order to control
the gate.
This type of configuration is not
recommended for commercial
installations.
2. Open Only
By having the radio receiver connected
as illustrated and with the “Timer” ON
(see page 25):
Each command of the radio transmitter is
ALWAYS AN OPEN COMMAND
to the gate.
!
TECHNICAL TIP:
For more information
regarding accessory connections
and terminal functions, refer to
“Appendix (A)” on pages 42-43.
