VIKING TECHNICAL SUPPORT 1.800.908.0884
2 4
LIMIT INDICATIONS
!
TECHNICAL TIP:
The Limit LEDs will illuminate solid when this operator reaches its
corresponding limit. If both Limit LEDs are illuminated at the same time, this indicates
that there is a problem with the limit switches or wiring.
!
IMPORTANT:
The gate operator uses positive stop limits. Therefore, the limits cannot
be set electronically by this controller. The Limit Buttons on the control board have
been rendered inactive by the controller. Refer to page 18 for specific instructions on
how to set the limits for this gate operator..
“Open Limit” LED
indicates the gate is
at the open limit.
“Close Limit” LED
indicates the gate is
at the close limit.
“Limit Close” LED
indicates Secondary
is at the close limit.
“Limit Open” LED
indicates Secondary
is at the open limit.
