Vigilant MX1-Au, Руководство оператора

Страница: 17 / 182

Document: LT0439 Vigilant MX1-Au Operator Manual
Issue 1.73 23 October 2018 Page 1-9
F1- F4
These keys are assigned functions as required according to the menu
being displayed on the LCD.
FAULTS
Pressing this key allows the operator to view zones and points in fault,
and to reset or disable them.
The yellow
FAULTS LED will illuminate when one or more faults are
present.
Refer to “Viewing Faults” (page 3-2) for more information.
DISABLES
Pressing this key allows the operator to view zones, points or alarm
devices that are in the Disabled state, and to enable them.
This is not to be confused with the fire brigade panel
DISABLE key.
The yellow DISABLES LED will turn on when one or more disabled
zones or points are present.
Refer to “Viewing Disables” (page 3-4) for more information.
TESTS
Pressing the TESTS key allows the operator to search for active tests or
initiate a test. When initiating a test the display will show menu options
for testing zones, points, alarm devices etc.
The TESTS LED will illuminate when one or more tests are in progress.
For more information about tests refer to
“Testing Zones” (page 6-11),
Testing Points
” (page 6-15) and “Power Supply Status and Battery
Testing
” (page 8-3).
AIF
This key allows the Alarm Investigation operation (if enabled) to be
switched between attended and unattended modes. In the attended
mode the adjacent yellow indicator is ON.
MENU
Press this key to access functional options from various displays. The
options shown in any given display may vary according to the current
Access Level.
ZONE
This key provides a convenient method to enter a zone or point function.
Refer to
“Displaying Zone or Point Command Menu” (page 6-1) for more
information.
Operator
Controls