ViewSonic
Wireless Media Adapter
46
When I connect the WMA100 to my display, if there is no
screen image or the screen image not clear, what should I do?
NOTE: This applies to the Component or DVI/VGA ports only.
After you turn on the WMA100, press the
Output
button on the Remote
Control. Wait two (2) seconds and if the image is still not clear, press the
Output
button again. If the screen image is still not clear, press
Output
a
third time. The
Output
button has a total of three (3) settings.
To optimize the screen image, do the following:
1
Select
Setup
from the
Home
page, then select
System
from the
Setup
menu.
2
Use the
Up/Down Arrow
buttons on the Remote Control to select an
image setting from the table to the right, then press
OK
.
NOTE:
For the best screen image, select your display’s Preferred Resolution
(see your display’s user manual).
Can I connect the two displays to the Wireless Media
Adapter (for example, using the S-Video port for the TV and
the DVI port for a PC monitor?
No. The Wireless Media Adapter currently only supports one connected
display.
What Windows operating systems support
myView Media
Manager
software?
Windows XP and 2000.
Image Settings
(resolutions) for
DVI / VGA
Image Settings for
Component Video
(YPbPr)
640 x 480
480p
800 x 600
720p
1024 x 768
1080i
1280 x 720
1280 x 768
1280 x 1024
S-Video/Composite
852 x 480
NTSC
(Composite = CVBS)
1366 x 768
WMA_UG.book Page 46 Tuesday, October 12, 2004 3:29 PM