CAUTION
•
Install or remove modules from the shelf only when the power is off.
If you install a module in the shelf with the power on, the internal
circuitry may suffer damage and the product warranty will be void.
•
Remove and install circuit boards only in a static-safe environment
(use antistatic wrist straps, smocks, footwear, etc.).
•
Keep circuit boards in their antistatic bags when they are not in use.
•
Do not ship or store circuit boards near strong electrostatic, electromag-
netic, magnetic, or radioactive fields.
•
For more complete information on electrostatic discharge safety
precautions, refer to Bellcore
TM
Technical Reference # TR-NWT-000870.
Copyright 1998 by Dantel, Inc. • Dantel is a registered trademark of Dantel, Inc. • ISO 9001 Registered
Printed in the U.S.A.
I
NSTALLATION
& O
PERATION
M
ANUAL
46033-1098 <90-00011>
46033
E-S
YSTEM
A
DAPTER
About this Practice:
This practice has been reissued to:
• Update
Ordering Information
section.
• Add note to
General Description
section on the difference between
a -01 and a -02.
Issue date: October 1998
Reissued Practices: Updated and
new content can be identified by a
banner in the right margin.
UPDATED
Table of Contents
Ordering Information ........................................................................... 2
General Description .............................................................................. 2
46033-01 Switch Settings ................................................................... 12
Technical Specifications ..................................................................... 46
DATA
XMT
A1146033-00 REV__
46033-XX
E-SYS
ADAPTER
CARRIER TEST
XMT
RCV
NORMAL
