background image

1

2.4GHz USB

Wireless Adapter

DWL-122

If any of the above items are missing, please contact your reseller.

CD-ROM (containing Drivers, Manual and Warranty)

This product works with the following operating
system software: 

Windows XP, Windows

2000, Windows Me, Windows 98SE,
Macintosh OS X (10.2.x or later)

Before You Begin

You must have at least the following for PC Windows Based Computers:

You will need a computer with an available USB port to connect the DWL-122
Wireless USB adapter.

At least a 300 MHz processor and 32 MB of memory

An 802.11b Access Point (for Infrastructure Mode) or another 802.11b wireless
adapter (for Ad-Hoc; Peer-to-Peer networking mode.)

Properly installed and working USB Controller.

DWL-122 Wireless USB Adapter

Check Your Package Contents

These are the items included with your DWL-122 purchase:

USB Extension Cable

You must have at least the following for Macintosh OS X Based Computers:

A Power Mac G3 or G4, iMac, iBook, or PowerBook (post PowerBook G3) with
at least 128MB RAM.

An 802.11b Access Point (i.e., D-Link Wireless Router, access point or Airport
Base Station for Infrastructure Mode) or another 802.11b wireless adapter (for
Ad-Hoc; Peer-to-Peer networking mode).

Properly installed and working USB Controller.

©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and

specifications subject to change without notice. 1G-BDWL-122 04222003

Summary of Contents for DWL-122

















Reviews: