ViewSonic
Wireless Media Adapter
17
3
With the
Auto-Sync
button highlighted on the Setup main menu (shown
to the right), press
OK
again. Auto-Sync will now begin automatically
synchronizing your WMA100 with your router/gateway.
•
If you see the message
Auto Sync was successful
, configuration is now
complete. You are now ready to start using your WMA100!
•
If the SSID Discovery Screen displays (shown to the right), the
WMA100 has recognized more than one network.
NOTE:
A maximum of five (5) SSIDs will display. If you do not see the
SSID you are looking for, press the
OK
. Auto-Sync will re-scan for
available SSIDs.
Use the
Up/Down Arrow
buttons to select your SSID (network name),
then press
OK
.
If you select an SSID that
does not
have a WEP or WPA key,
configuration is now complete. You are ready to start using your
WMA100!
•
If you select an SSID that
does
have a WEP or WPA key, the
Wi-Fi
Setup Screen
(shown to the right) will automatically display.
1
Use the
Down Arrow
button to select either “
WEP Enabled
” or
“
WPA-PSK Enabled
,” then press
OK
.
2
Complete the remaining fields according to the settings of your
router/gateway, select
Save
, then press
OK
.
Wi-Fi configuration is now complete!
Setup Main Menu
SSID Discovery Screen
Wi-Fi Setup Screen
WMA_UG.book Page 17 Tuesday, October 12, 2004 3:29 PM