ViewSonic SD-T225 Скачать руководство пользователя

Страница: 49 / 88

Use the controls below to launch Discovery settings, Authentication Manager, or change the Ignored
status of an IP.

Button Options

Description

Allows the user to dispatch Wake-On-LAN command for the
selected IPs.

Adds an IP address to allow the server to discover the associated
devices.

Allows the user to set ignore state for the selected IPs.

Allows the user to undo the ignore state for the selected IPs.

IP Address

Indicates the list of available IP addresses.

Protocols such as
AMT, Windows OS

Indicates the detected protocols such as AMT, Windows OS, and
Linux OS that are currently installed.

Manageability
Status

Indicates the current manageability status of the IP. For a device to
be considered managed, at least one protocol must authenticate
successfully. If any IPs are ignored, their status will be reflected
here as well.

The manageability status of the detected IPs is displayed on the left-hand bottom side of the page.

Button Options

Description

Indicates the devices that support at least a single manageability.

Indicates the devices that cannot authenticate or support any
protocol.

Indicates the devices that are ignored.

Indicates the devices that are not licensed.

Содержание SD-T225

























































































Результаты поиска

Содержание SD-T225

Отзывы:

Похожие инструкции для SD-T225

Бренды по названию

Популярные бренды

ViewSonic SD-T225, Руководство пользователя

Результаты поиска

Содержание SD-T225

Отзывы:

Похожие инструкции для SD-T225

Бренды по названию

Популярные бренды