Page 42
Device / Vendor / Size
Shows the device information that you connected to the SATA connectors.
LBA/Large Mode
This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA mode if the device supports it
and the devices are not already formatted with LBA mode disabled.
DMA Mode
Selects the DMA mode.
Hard Disk S.M.A.R.T.
This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Reporting Technology) capability for the
hard disks. S.M.A.R.T. is a utility that monitors your disk status to predict hard disk failure. This gives you an
opportunity to move data from a hard disk that is going to fail to a safe place before the hard disk becomes
offline.
NOTE
IDE Primary Master/Slave and Serial-ATA 1/2/3/4 Channels appear when you connect the HD devices to the
IDE/SATA connectors on the mainboard.
Floppy A
This item allows you to set the type of floppy drives installed. Available options: [None], [360K, 5.25 in.], [1.2M,
5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.].
System Information
Press <Enter> to enter the sub-menu and the following screen appears.
This sub-menu shows the CPU information, BIOS version and memory status of your system (read-only).
