background image

Argus QuickClix 2185 
Digital Camera Quick Start Guide 

 
 
 
 
 
 
 
 
 
 
 
 

Getting Started 

 
1.

 

Remove the plastic protective covering from the LCD on the back of the camera. 

2.

 

Open the battery door on the bottom of the camera and insert three AAA alkaline batteries.   
a.

 

Please use high grade Alkaline, Photo Grade Alkaline or rechargeable alkaline batteries 
for the best performance with your camera. 

b.

 

Do not leave batteries in your camera for an extended period of time without use as they 
may cause damage to the camera.

  (Please transfer your pictures to your computer before 

you remove the batteries.)

 

3.

 

Turn the camera on by pressing the “M/ON/OFF” button for approximately, three seconds – 
without use your camera will automatically shut off after 60 seconds, however you can also 
shut it off by pressing and holding the “M/ON/OFF” button for approximately three seconds 
when the camera is on. 

4.

 

Frame your subject using either the optical or LCD viewfinder – always try to get as close as 
you can and be sure there is enough light – if more light is needed, please turn on the flash 
feature. 
a.

 

Turn on the flash by holding the “Flash/Down” key on the 

 - you will see the Flash 

icon on the LCD blink for a few seconds and then a Flash symbol with an A will appear 
on the LCD – the Auto Flash is now on.  The camera will then be in Auto Flash menu 
and the camera will adjust the light for the exposure automatically. 
1.

 

The flash icon should NOT have a line through it as that would indicate the flash is in 
the off mode. 

2.

 

If the flash icon will not set to auto flash, that typically indicates that your batteries 
are low and need to be replaced. 

3.

 

The default for the flash is OFF.  Each time you turn your camera on, you will need to 
reset the flash to Auto Flash if needed. 

b.

 

Once the subject is framed and the lighting condition is set, press the shutter button on 
the top of the camera.  Please hold the camera steady for approximately three seconds to 
ensure the best exposure.   

c.

 

To review the image, press the “Preview” button. 

d.

 

To return to the capture mode, press the “Preview” button again. 

 

Argus Camera Company 

1610 Colonial Parkway 

Inverness, IL 60067 

[email protected]

 

www.arguscamera.com

 

Содержание QuickClix QC-2185

Страница 1: ... sure there is enough light if more light is needed please turn on the flash feature a Turn on the flash by holding the Flash Down key on the you will see the Flash icon on the LCD blink for a few seconds and then a Flash symbol with an A will appear on the LCD the Auto Flash is now on The camera will then be in Auto Flash menu and the camera will adjust the light for the exposure automatically 1 ...

Страница 2: ...t for storage and usage considerations If you want to take lots of images on a very small SD card 32 MB or 64 MB then you may want to use the VGA or 1 Mega Pixel resolution These images will be just fine for use on the computer screen or in e mails but will not be as good for printing If you plan to print the images with the best possible quality then consider using the 2 Mega Pixel resolution To ...

Страница 3: ...es you have taken on your computer In Windows Me 2000 XP that camera is Plug N Play and the drivers are built in In Windows 98 Second Edition you must install the drivers first To access your pictures through your computer plug the camera in to one of the rear USB ports on your computer and then open up My Computer In My Computer you should see several icons One of them should be labeled Removable...

Страница 4: ...mera which is great for taking short videos for use on your PC To use the camera for PC Video a To enter the Video Clip mode turn the camera on and press the M ON OFF button three times You will see a video camera icon Press the shutter button once to select this mode You will then see a flashing AVI icon on the bottom left corner of the LCD screen You are now ready to capture short video clips Pl...

Отзывы: