Page 21
STEP 3
Once the system is in place, insert the safety bar into
the slots in the bottom of the monitor brackets so that
it sits behind the bottom tab on the wall plate as
shown left. The bend at the end of the safety bar
should face toward the wall. Once the safety bar
passes out the other side of the wall plate, a padlock
can be added to the hole at the end of the safety bar
for additional security.
Using the Monitor Stand (Optional)
STEP 1
Using a Philips screwdriver, tighten six screws as
shown on the left to install the optional monitor stand.
NOTE
To prevent scratching the screen, set a cloth on a flat,
level surface that will support the weight of the
screen. Place screen face side down. Place monitor
stand bracket on back of screen and align to holes.
NOTE
The vertical position of the monitor may be adjusted
by changing the hole positions.
Safety bar
Padlock hole
Bend facing the wall
