Page 7
P
P
r
r
e
e
c
c
a
a
u
u
t
t
i
i
o
o
n
n
s
s
General Safety Guide
A nameplate indicating operating voltage, power consumption, etc. is located on the rear of the unit.
Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified
personnel before operating the unit any further.
Unplug the unit from the wall outlet if it is not to be used for several days or more.
To disconnect the AC power cord, pull it out by grasping the plug. Never pull the cord by itself.
When you install the units on the floor, be sure to use the optional stand (if applicable).
Installation
Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains, draperies) that may block the ventilation holes.
Do not install the unit in a location near heat sources such as radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical vibration or shock.
When you install multiple equipment with the unit, the following problems such as malfunction of the remote
control, noisy picture, and noisy sound may occur depending on the position of the unit and other
equipment.
Cleaning
Be sure to unplug the power cord from the unit and/or electrical outlet before cleaning the display unit.
Gently wipe off stains using a dry soft cloth. Wire off grimy stains using a cloth slightly moistened with a
mild detergent, then wipe the area again using a dry soft cloth.
Never use alcohol, benzene or thinner for cleaning purposes. They may damage the finish of the display
unit or can remove the markings on it.
Notes on Handling and Cleaning the Display Panel
The special surface finish on the LCD display panel should be treated with care when cleaning or handling the
unit. When cleaning it, use a soft cleaning cloth to avoid any scratches or damage to the panel.
Repacking
Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit.
When shipping the unit, repack it in the manner the unit was initially packed.
Contact your authorized local dealer if you have any questions on this unit.
Warning on Power Connection
Use the proper power cord for your local power supply.
United States, Canada
Continental Europe
United Kingdom, Ireland,
Australia, New Zealand
Plug type
CM0233
COX-07 / 636
Appropriate rating plug which
complies with local regulations
Female end
CM0089
COX-02 / VM0301B
VM0303B
Cord type
SVT
H05VV-F
CEE (13) 53
rd
(O.C)
Minimum cord set rating
10A/125V
10A/250V
10A/250V
Safety approval
UL/CSA
VDE
VDE
