Page 18
Mounting the System
Wall Mounting
WARNING!
5
Do not begin to install the system until you have read and understood the instructions and warnings
contained in this section.
5
Make sure that the supporting surface will safely support the combined load of the system and all attached
hardware and components.
5
Never exceed the Maximum Load Capacity of 220 lb (100 kg).
5
If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs.
Use of an “edge to edge” stud finder is highly recommended.
5
Always use an assistant or mechanical lifting equipment to safely lift and position the system.
5
When installing wall mounts on cinder block, verify that you have a minimum of 1-3/8” of actual concrete
thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints. Besure to mount in a
solid part of the block, generally 1” (25 mm) minimum from the side of the block. It is suggested that a
standard electric drill on slow setting is used to drill the hole instead of a hammer drill to avoid breaking out
the back of the hole when entering a void or cavity.
5
Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor.
5
Concrete anchors are NOT intended for attachment to concrete walls covered with a layer of plaster, drywall,
or other finishing materials. If mounting to concrete wall covered with plaster/drywall is unavoidable,
plaster/drywall (up to 5/8” thick) must be counterbored. Be sure concrete anchors do not pull away from
concrete when tightening screws. If plaster/drywall is thicker than 5/8”, custom fasteners must be used.
5
Tighten the screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their
holding power.
Required Tools
Drill, level, 3/16” drill bit, 1/2” masonry bit for brick concrete or concrete block installations, wrench or socket set,
Philips screwdriver
Parts List
AA
Wall Plate (1)
BB
Left monitor bracket (1)
CC
Right monitor bracket (1)
DD
Safety bar (1)
M4x12 Bolt (4) M5x12 Bolt (4) M6x12 Bolt (4) M8x25 Bolt (4)
M4x30 Bolt (4) M5x30 Bolt (4) M6x35 Bolt (4) M8x40 Bolt (4)
M4 Lock washer (4) M5 Lock washer (4) M6 Lock washer (4) M8 Lock washer (4)
M4/M5 Spacer (4) M6/M8 Spacer (4) M4/M5 Washer (8) M6/M8 Washer (8)
Lag bolt (6) Lag bolt washer (6) Concrete Anchor (6)