Viessmann Vitocal 300 AWO-M-AC 301.A, Инструкция по установке и обслуживанию

Страница: 70 / 152

70
2. Route cables B and F through the
entry in the control panel and plug in
strain relief fittings.
3.
Secure cover
A
.
4. Push the plug of connecting lead F
(LV lead < 42 V ) onto the 13-pin plug-
in strip X9 .
5. Push the plugs of the connecting
cable
B
(control cable 230 V~ ) onto
the 7-pin plug-in strip X2 and 15-pin
plug-in strip X1 .
6. Affix the individual cores of connect-
ing cable
B (control cable 230 V~ )
to terminal X14.6 for the PE connec-
tion.
7. Secure connecting cables B and
F with 4 cable ties E to bracket
C .
8. Bundle all cores of connecting cable
F
close to plug
D
using cable ties.
This ensures that if a fault occurs, for
example when detaching a wire, the
wires cannot drift into the adjacent
voltage area.
Installation sequence
Electrical connections in the control panel
(cont.)
5692 875 GB