Spec
Sheet
Burner System Loader System
PYROMAT-DYN
1
Köb Holzheizsysteme GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. +43/5574/6770-0, Fax 65707, E-Mail: [email protected]
Subject to technical changes
3010-2
2009-03-01_GB
Schematic diagram with ECOTRONIC
a) DYN with reduced log operation (standard with accumulator as hydraulic switcher)
b) DYN with full ECO-function in log operation (accumulator volume as per EN 303-5 – see Spec Sheet 3950)
With this variation, the heat accumulator is incorporated by a storage control valve [Art. No. LSR-DYN-]
ECOTRONIC with heating control unit
The ECOTRONIC can be expanded by a great number of heating control units (heat consumers, auxiliary heat
generators) (refer to spec sheets, Category 4). The operation of the heating control units is all carried out in the control
module for the burner system. Each controller is operated by a separate pushbutton.
For ECOTRONIC expansion possibilities, refer to spec sheets, Category 4
PYROMAT-DYN with integrated heat distributor
One heat distributor with two or three consumer groups can be integrated with the PYROMAT-DYN boiler.
In this design with the manifold attached, the boiler forms a compact overall system (refer to Spec Sheets 4600).
+
F8
OK
-
F7
>
KÖB
F6
F5
>
<
F3
F4
F1
F2
>
accumulator as
hydraulic switcher
accumulator
additional
heat generator
3
2
1
heat consumer
control
module
control system module
ECO-RM-00
Pyromat-DYN
control
module
heat consumer
additional
heat generator
1
2
3
control system module
ECO-RM-00
accumulator
2
accumulator
1
Pyromat-DYN
+
F8
OK
-
F7
>
KÖB
F6
F5
>
<
F3
F4
F1
F2
>
