Spec
Sheet
Accessories for PYROMAT-DYN
Conducting Exhaust Gas / Cleaning
Köb Holzheizsysteme GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. +43/5574/6770-0, Fax 65707, E-Mail: [email protected]
Subject to technical changes
3110-1
2009-03-01_GB
Reducer for Exhaust Gas Connection 180
[Art. No. KPM-RD-180 / 7387892]
Reducer for Exhaust Gas Connection 160
[Art. No. KPM-RD-160 / 7387961]
This reduces exhaust gas connection from D 200 mm to D 180 mm or 160 mm (plug-in extension by 100 mm).
Note: Only for burner systems Pyromat 45, 65
Exhaust Fan Intake Port, 90° left
[Art. No. KPM-RG-90-L / 7387871]
Exhaust Fan Intake Port, 90° right
[Art. No. KPM-RG-90-R / 7387970]
Exhaust gas de-duster Pyromat 35-75
[Art. No. KPM-RE-70 / 7387875]
Exhaust gas de-duster Pyromat 81-151
[Art. No. KPM-RE-150
/ 7387926]
An axial cyclone de-duster that attaches to the exhaust gas port of the
Pyromat boiler. The ashes are removed at the bottom from the side.
The de-duster is insulated and cased in powder-coated steel plate.
When operated according to the operating instructions, dust emissions,
even when chips are incinerated, are under 150 mg/Nm³ based on 13%
residual oxygen.
Exhaust blower: The exhaust blower mounts onto the de-duster and has
greater dimensions in comparison with the normal design.
[Art. No.]
KPM-RE-70
7387875
KPM-RE-150
7387926
For boiler KPM-DYN
45
65
85
Exhaust blower [kW]
0.08
0.15
0.25
A 450
450
B 1161
1411
C 190
190
D 320
320
E 1671
1921
G 200
200
H 265
265
J 740
520
K 177
205
L 454
520
M 364
410
N 293
293
S 200
200
Weight [kg]
74
95
Note:
An exhaust gas de-duster is necessary when a large amount of fine particles is present in automatically loaded
fuel (wood-processing businesses, chips with high percentages of fine particles, etc.).
No exhaust gas de-duster is necessary for pellets, briquettes or chip materials with a low percentage of fine particles
(less than 10%).
exhaust fan
aligned to the right
exhaust fan
aligned to the left
PYROMAT burner
PYROMAT burner
burner
PYROMAT
cleaning lid
Lambda sensor
exhaust gas sensor
ash removal
cleaning lid