Vidikron PlasmaView VP-42, Руководство пользователя

Страница: 52 / 117

51
OSD (On Screen Display) Controls
POWER / STANDBY indicator
AUTO
OFF
mode POWER /
STANDBY
indicator AUTO OFF
operating
status Description Turning the picture
back on
On Green Not
activated. Horizontal and
vertical synchronizing
signals are present
from the computer. Picture already on.
Off Red Activated. Horizontal and/or
vertical synchronizing
signals are not sent
from the computer. Operate the keyboard
or mouse. The
picture reappears.
Setting the picture to suit the movie
The film image is automatically discriminated and projected in
an image mode suited to the picture. [NTSC, PAL, PAL60, 480I
(60Hz), 525I (60Hz), 576I (50Hz), 625I (50Hz), 1035I (60Hz),
1080I (60Hz) only]
Example: Setting the “CINEMA MODE” to “OFF”
Perform the following operations.
Press the MENU button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select “SETTING 2”, then press the
MENU button. The “SETTING 2” menu appears.
2. Use the and buttons to select “CINEMA MODE”.
3.
To set the CINEMA MODE to “OFF”...
Use the and buttons to select “OFF”. The mode switches as
follows each time the or button is pressed:
ON OFF
4.
Once the setting is completed ...
Press the EXIT button to return to the main menu. To delete the
main menu, press the EXIT button once more.
Information
■
CINEMA MODE
ON ......... Automatic discrimination of the image and projection
in cinema mode.
OFF ....... Cinema mode does not function.
■
Restoring the factory default settings
Select “FACTORY” under the SETTING 1 menu.
Note that this also restores other settings to the factory defaults.
AUTO OFF : OFF
CINEMA MODE : OFF
PIXL PROTECT : OFF
GRAY LEVEL
: 3
S1 / S2 : OFF
DVI TYPE
SETTING 2
2 / 3
SEL. ADJ. EXIT
EXIT
PREVIOUS PG.
NEXT PAGE