Manual Voice Server Anuncio © 2009-2014 Vidicode®
48
6.21
Service timer
The Service timer determines the performance of the network
connection. Default the Service timer is set to Automatic. Changing the
setting should only be done when advised by a service engineer to solve
problems.
•
Press CHANGE
CHANGE
CHANGE
CHANGE to change the Service timer.
The following settings are available:
S1-S5, F1-F4 and U1-U4. Where S stands for Slow, F for Fast and U for
Ultra fast.
•
Press NEXT
NEXT
NEXT
NEXT to move on to the next menu item.
6.22
Monitor active
The monitor function allows you to listen to the conversations that take
place. This requires the RTR Call Monitor software, which connects with
the Voice Server over the network.
•
Press CHANGE
CHANGE
CHANGE
CHANGE to enable the Monitor.
•
Press NEXT
NEXT
NEXT
NEXT to move on to the setting of the Monitor password.
The monitor password is used to log on to the Voice Server. This
password must also be set in the RTR Call Monitor software.
•
Press CHANGE
CHANGE
CHANGE
CHANGE to enter a password
•
Press STOP
STOP
STOP
STOP to exit the network configuration.
Monitor pwd: 0000
CHANGE STOP
Monitor active: No
CHANGE STOP
Server timer: Auto
NEXT
CHANGE STOP