Manual Voice Server Anuncio © 2009-2014 Vidicode®
33
5.4
No Answer Timeout
This is used when an extension is not answered. The no answer timeout
is the time between the arrival of the call and that Voice Server
answering. The Voice Server will only answer after the No Answer
Timeout if it is instructed to do so.
•
Press +
+
+
+ or ---- to increase or decrease the No Answer Timeout by 1
second.
5.5
Connection
This setting only applies to an Anuncio for Basic Rate ISDN. It will not
appear when your line type is Primary Rate.
There are two different line configurations possible for Basic Rate ISDN;
point-to-point and multipoint. Point-to-point is common when several
lines are connected to one PBX. Multipoint is for home users and small
businesses when several machines are connected to one line (fax, PC,
telephones). The signalling on the line is quite different and therefore
the Anuncio must be configured for either one or the other. When you
have a PBX it could still be possible the lines are multipoint because
most PBX’s can work with both systems. When in doubt, ask your
supplier.
5.6
Total lines
This setting only applies to an Anuncio Basic Rate. It will not appear
when your line type is Primary Rate.
Configure the number of lines the Anuncio acts on. This can be 2, 4, 6 or
8. If you use port 1 only, it must be set to 2, if you use port 1 and to 2, it
must be set to 4, etc, up to 8.
Connection: Point-to-point
NEXT CHANGE STOP
No Answer Timeout: 16s
NEXT - STOP
