Videonics MXPro, Руководство пользователя

Страница: 98 / 170

90
Chapter 8 Videonics MX-Pro User Guide
You can apply the following shapes to PIP tiles.
To select a shape, press the numeric key (0 through 9) that corresponds to the shape
you want, as indicated below.
Manipulating the Mask The mask changes shape, size, and position when you change the corresponding
attribute of the foreground tile. You can, however, manipulate the mask indepen-
dently, as described in this section.
Using Other Effects with Single PIPs
Input Effects You can apply any of the input effects (see Chapter 6, Input Effects ) to the background
and/or foreground tile. Apply the input effect(s) you want prior to entering PIP mode.
The Freeze Effect You can apply the Freeze effect (see “Freeze” on page 83) to the background and/or
foreground tile.
Press FREEZE while in PIPs mode to freeze the background. Press FREEZE again to
release the freeze effect.
Press SHIFT+FREEZE while in PIPs mode to freeze the foreground tile. Press
SHIFT+FREEZE again to release the freeze effect.
When you exit PIPs mode, MXPro removes the freeze effect from the foreground source.
0 2 3 4
5 6 7 9 8
1
Table 11: Manipulating PIPs Mask
To change
mask…
Use or press… Notes…
Position
SHIFT+JOYSTICK Change mask position.
Style
(Press keys repeatedly to cycle through available colors and styles.)
BORDER COLOR Change mask border color.
BORDER STYLE Change mask border style.
Size
SHIFT+T-BAR Change mask size.
SHIFT+UP ARROW Increase vertical size of mask.
SHIFT+DOWN ARROW Decrease vertical size of mask.
SHIFT+RIGHT ARROW Increase horizontal size of mask.
SHIFT+LEFT ARROW Decrease horizontal size of mask.