Videonics MXPro, Руководство пользователя

Страница: 74 / 170

66
Chapter 6 Videonics MX-Pro User Guide
U
SING
I
NPUT
E
FFECTS
Input effects aren’t visible in the small Preview thumbnails. To make them visible:
1
Make the channel to which the input effects are applied the NEXT source. That is,
press
NEXT/A , B , C , or D .
2
Press the DISPLAY button to display the NEXT Preview option (see “Display”
beginning on page 73); or use the shortcut SHIFT+4.
Once you apply an input effect to a channel, it remains in effect at all times (even dur-
ing transitions) until you specifically change it, with these exceptions:
• Some effects do not apply to the foreground image while using PIPs, Chroma Key,
and Compose.
• MXPro Color Correction turns off during transitions if it is enabled on more than
one channel. See “Color Correct” on page 68 for more information.
• MXPro turns off Strobe during transitions.
• MXPro turns off all Input Effects during Trailing transitions.
With the exception of Chroma Key, each input effect has associated with it a “parame-
ter” value. In some cases, the value can be either 0 (zero) or 1. In others, it can range
from 0 to 9. The Color Correction option also works a little differently: see “Color Cor-
rect” on page 68.
Procedure
To apply a parameter value:
1 Press INPUT EFFECTS or one of the input effects buttons to display the Input
Effects menu.
2 If you haven’t already done so, use the ARROW keys or INPUT EFFECTS button
to select the Input Effect to which you want to apply parameter values.
3
Set the parameter value to 0 (zero) to turn it off, or to 1 to turn it on.
4
Use one of the NEXT buttons to select the source to which you want to apply the
effect. For example, press NEXT/B to apply the effect to channel B.
5 Type the parameter value on the MXPro numeric keypad, or continue pressing
the corresponding effects key until the parameter value you want appears in the
menu.
6 Press OK to exit from Input Effects mode.
MXPro stores the most recent set of input effects. Therefore, when you turn the unit off,
then turn it back on again, the most recent selection of input effects is still active.