Videonics MXPro, Руководство пользователя

Страница: 73 / 170

65
Input Effects Special Key Combinations
Special Key Combinations
Use the following key combinations while working with the Input Effects menu.
When you are not working at the Input Effects menu, use the following key combina-
tions.
When the Input Effects LED light is lit, Input Effects are enabled . MXPro applies the
effects according to the parameter values for each effect.
When you use the SHIFT+INPUT EFFECTS key combination to disable Input Effects,
MXPro turns off the LED light. It does not change any effects parameter values, but it
does prevent the current Input Effects from being used. Press
SHIFT+INPUT EFFECTS
again to enable them.
Table 7: Input Effects Mode Key Combinations
Key Combination Result
ARROW KEYS Moves cursor (or, highlight) between the different Input
Effects.
Numeric Keypad Directly sets the parameter value for the highlighted
effect.
INPUT EFFECTS Exits from Input Effects mode.
EFFECTS buttons Moves the cursor directly to that effect – for example,
press
POSTERIZE to highlight that effect: press
MOSAIC to highlight that effect: and so on.
If the selected effect matches the currently highlighted
one on the Input Effects menu, pressing the
EFFECTS
button increments the effect’s parameter value by one.
SHIFT+0 (zero) Resets all effects to 0 (off) for the selected channel.
Table 8: Main Mode Input Effects Key Combinations
Key Combination Result
SHIFT+EFFECTS button Increments the parameter value by one for the selected
effect and applies it to the CURRENT source.
SHIFT+INPUT EFFECTS Temporarily disables Input Effects from being sent to
Program out. See the following paragraph.