Videonics MXPro, Руководство пользователя

Страница: 52 / 170

44
Chapter 4 Videonics MX-Pro User Guide
Creating Custom Colors
You can change any color other than Black (see Table 3 on page 42) to create custom
colors. You cannot add more colors, but you can change the existing ones. Once you
create a custom color, it stays permanently in the MXPro unit until and unless you
change it again.
BG COLOR and BORDER COLOR share the color palette. Therefore, changing any
color affects both the background and border colors.
Procedure
To create a custom color:
1 Press BG COLOR or BORDER COLOR until the color you want to change
appears in the Color Selector.
2 Press LEARN+BG COLOR or LEARN+BORDER COLOR (depending on which
one you want to change).
These key combinations activate Learn Color mode. MXPro blinks the VIDEO/
AUDIO selector lights to indicate you are in the proper mode.
3
Use the JOYSTICK and T-BAR in combination to define the new color.
a
Move the T-BAR up and down its slot to adjust luminance.
b Move the JOYSTICK relative to its color ring to adjust chrominance (or, color
value).
4 When the color you want appears in the Color Selector, press OK . You exit from
Learn Color mode and the VIDEO/AUDIO lights cease blinking.
If you decide you don’t want to change the color after manipulating the JOY-
STICK and T-BAR , press SHIFT+0 (zero) to revert back to the original color.
MXPro restores the original color and exits from Learn Color mode (the VIDEO/
AUDIO lights cease blinking).
Red
Cyan
Yellow
Green
Magenta
Blue