Videonics MXPro, Руководство пользователя

Страница: 122 / 170

114
Chapter 12 Videonics MX-Pro User Guide
A
UDIO
D
EVICES
Y
OU
C
AN
U
SE
You can:
• Use dedicated audio input sources, such as audio cassette players, compact disc
players, and even live microphones. (See “Using a Microphone with MXPro” on
page 30 for installation instructions.)
• Use the audio signal coming from combined input sources, such as the audio
track contained on a video tape.
• Separate the audio signal to record only the audio track from a video tape, laser
disk player, and so forth.
W
AYS
Y
OU
C
AN
C
ONTROL
A
UDIO
Basically, you can:
• Control the way audio transitions between scenes.
• Mix the audio coming from input sources
C
ONTROLLING
A
UDIO
T
RANSITIONS
You control audio transitions somewhat the same as video transitions. However,
MXPro gives you the ability to control audio and video separately. The two compo-
nents for managing audio transitions are the
VIDEO/AUDIO selector (on the key-
board) and the top of the Preview screen.
VIDEO/AUDIO Selector
Small lights appear above and below the VIDEO/AUDIO selector labeled VIDEO and
AUDIO . The lights tell you whether the next transition will affect the video, the audio,
or both. By pressing the VIDEO/AUDIO selector you can choose between the following
states:
• To have the next transition affect both the video and audio, press VIDEO/
AUDIO until both lights are on.
• To have the next transition affect only the audio (leaving the video unaffected),
press
VIDEO/AUDIO until only the AUDIO light is on.
• To have the next transition affect only the video (leaving the audio unaffected),
press
VIDEO/AUDIO until only the VIDEO light is on.
You’ll learn more about using the VIDEO/AUDIO selector to achieve a sound mix later
in this chapter under “Ways to Use Audio”.
VIDEO
AUDIO