4.1.2. Communication Protocol Setup
Select the appropriate Protocol with a DIP switch combination.
Switch State
P0
(Pin 1)
P1
(Pin 2)
P2
(Pin 3)
P3
(Pin 4)
Protocol/Baud rate
OFF
OFF OFF OFF PELCO-D,
2400
bps
ON
OFF
OFF
OFF
PELCO-D, 9600 bps
OFF
ON OFF OFF PELCO-P,
4800
bps
ON
ON OFF OFF PELCO-P,
9600
bps
Otherwise Reserved
Default
Setting
If you want to control using a DVR or P/T controller, their protocol must be identical to
camera. Otherwise, you will not be able to control the camera.
Any changes made to the camera protocol by changing the DIP S/W will be effective after
you reboot the camera.
Factory default of protocol is ‘Pelco-D, 9600 bps’.
Doc # INS 20/21Z704T-PZ
Issue Date: 03/22/2007
Revision: C
Page
9
of
32
