6.4. Camera
Setup
Setup the general functions of zoom camera module.
Digital Zoom
[ON/OFF]
Focus Mode
[AUTO/MANUAL]
Back Light
[ON/OFF]
Day/Night
[AUTO/DAY/NIGHT]
White Balance [AUTO/SPECIAL/INDOOR/
OUTDOOR/ MANUAL/ PUSH AUTO]
Flickerless
*
[ON/OFF]
If the camera is used with 50Hz fluorescent lighting, there is a flicker on the screen. In this
case, it should be set to "ON". However the flickerless function should be set to "OFF" in
60Hz power source situations. The flickerless mode helps overcome flickering on the screen
in cases where the AC power frequency is different from the vertical sync frequency of the
camera.
(*
When the flickerless function is set to "ON", DSS (Digital Slow Shutter) function does not
work.)
(DSS operates only in “DAY” mode.)
Line Lock Sync
[ON/OFF]
If Line lock sync is ON, the video signal is synchronized with AC power.
Reset Camera
Initialize the zoom camera module.
Doc # INS 20/21Z704T-PZ
Issue Date: 03/22/2007
Revision: C
Page
21
of
32
