6.5.7. Edit Preset Scene
Using the Joystick, move the camera to the desired
position.
By pressing the Near key, save the current PTZ data.
Press the Far key to cancel.
6.6. Pattern
Setup
Pattern Number
[1~4]
Select the pattern number to edit.
If the pattern selected does not exist, “UNDEFINED”
will be displayed as shown bellow.
Program Pattern
If you choose this, you will go to the sub menu to record a pattern.
Clear Pattern
[ON/OFF]
6.6.1. Record Pattern
By using the Joystick, move to the start position with the
appropriate zoom. To start the pattern recording, press
the Near key. To exit this menu, press the Far key.
Maximum recording time is 1 min. The time remained will
be displayed by % on the screen.
While you are moving and zooming the camera, the
trajectory is controlled by the joystick and will be
recorded at the same time.
If you press the Near key, the data will be saved and this
menu is exited. If you press the Far key, the date
recorded up to now will be abandoned and this menu is
exited.
Doc # INS 20/21Z704T-PZ
Issue Date: 03/22/2007
Revision: C
Page
26
of
32
