5.9. Other
Functions
Power Up Action
This function enables the camera to resume the last action executed before power down.
Most actions such as Preset, Pattern, Swing and Group are available for this function but Jog
actions are not available to resume.
Auto Flip
If the tilt angle exceeds - 90
°
, Pan is automatically turned to the opposite direction (+180
°
)
to track the target continuously.
Park Action
This function enables the camera to locate a specific position automatically if the operator
doesn’t operate the controller for a while. The Park Time can be defined as an interval from
1 min. to 4 hours.
Origin Position
Using this function, the origin position can be defined by the operator. The Pan angle display
will be changed if you change the origin position. It is noted that the tilt angle is not
affected by this function.
Alarm I/O
If you use the optional Alarm I/O module, you can take advantage of 8 alarm inputs and 4
alarm outputs. If an external sensor is activated, the camera can be set to move to a
corresponding preset position. Also, the output relay can be matched to some specific
preset positions to do counteractions, such as turning on a light or sounding an alarm. It is
noted that the last alarm input is effective if multiple sensors are activated.
Privacy Mask
To protect privacy, a maximum of 8 white masks can be created on the arbitrary position to
hide objects such as windows, shops or private houses. It is noted that some mismatches or
misalignment can be realized since the OSD display is slow and its minimum resolution is
limited to a character size.
Doc # INS 20/21Z704T-PZ
Issue Date: 03/22/2007
Revision: C
Page
18
of
32
