6.9.1. Privacy Zone Position Setup
1. By using the joystick, move to the scene to
hide with mask. Adjust the zoom ratio
properly since the mask will be created as
full screen size. If you finished the
masking, press the Near key to show the
mask on the screen or press the Far key to
cancel.
2. After the privacy mask is displayed, press
the Near key to save or press the Far key
to abandon.
3. After you exit the Privacy Mask menu, you
will see the mask whenever you move to
the location privacy zone is assigned. The
number in the center of the mask
represents the Privacy mask number. A
maximum of 8 zones can be located
wherever needed to protect privacy. It is
noted that some mismatch or misalignment
can be realized since the OSD display is
slow and its minimum resolution is limited
to a character size.
Doc # INS 20/21Z704T-PZ
Issue Date: 03/22/2007
Revision: C
Page
29
of
32
