Victoria Arduino Adonis+ 2 Gr, Техническое руководство

Страница: 86 / 136

84
EN
8.1 SWITCHING OFF THE MACHINE
To switch the machine off press the main switch and
set the machine to the "
O " energy position.
8.2 CLEANING THE OUTSIDE
OF THE MACHINE
The machine must be set to “O” power (switch off and
disconnector open) before any cleaning operations are
performed.
WARNING
Do not use solvents, chlorine-based products or
abrasives.
WARNING
It is not possible to clean the machine using water jets
or standing it in water.
Cleaning the work area: remove the worktop, lifting it
up from the front and sliding it out. Remove the water
collection dish underneath and clean everything with hot
water and cleansers.
Cleaning the bottom: To clean
all the chromium-plated areas, use a soft, damp cloth.
8.3 CLEANING THE STAINLESS
COFFEE-HOLDERS
The stainless coffee-holders are situated under the
delivery units, as shown in
Fig. 21 .
Fig. 21
NOTE
To clean proceed as follows:
‡ Turn the screw placed in the centre of the coffee-
holder.
‡ Slide the coffee-holder out and check that its holes
are not obstructed but clean.
‡ If obstructed, clean as described (Paragraph
“ CLEANING FILTERS AND FILTER-HOLDERS ”).
We recommend cleaning the coffee-holder once a
week.
8. CLEANING AND MAINTENANCE