Victoria Arduino Adonis+ 2 Gr, Техническое руководство

Страница: 79 / 136

77
EN
The message ON XX will begin to flash; use the W
V keys to change the cup warmer open time (from
0 to 60 min.).
‡ Press ENTER to confirm and pass to the cup warm-
er OFF time (from 0 to 60 min.).
NOTE: Setting one of the two ON/OFF values to 0 will
automatically bypass the function.
When the cup warmer is programmed, the
button will flash slowly.
‡ Press the ENTER key to pass to the next page.
Single temperature
‡ The display will read:
‡ Using the WV keys, it is possible to increase or
reduce the temperature within a certain range [40°C
÷ 80°C] / [104°F ÷ 176°F].
‡ Press ENTER to confirm and pass to the next step.
‡ Press RESET to return to the previous page without
confirming.
Double Temperature
‡ The display will read:
‡ Using the WV keys, it is possible to increase or
reduce the temperature no.1 within a certain range
[40°C - 80°C] / [104°F - 176°F].
‡ Press RESET to return to the previous page without
confirming.
‡ Press ENTER to confirm and pass to the next step;
the display will read:
‡ Using the WV keys, it is possible to increase or
reduce the temperature no.2 within a certain range
[40°C ÷ 80°C] / [104°F ÷ 176°F].
‡ Press ENTER to confirm and pass to the next step.
‡ Press RESET to return to the previous page without
confirming.
DATE/TIME PROGRAMMING
‡ The display will read:
‡ By pressing the ENTER key, the display will read for
example:
The times will start to flash on and off.
‡ Vary the hours and the minutes by using the
key WV .
CUP-WARMER
SETPOINT xxx
°
C
CUP-WARMER ™
SETPOINT xx
°
C
CUP-WARMER ¡
SETPOINT XXX
°
C
DATE/HOUR
MONDAY 08:22
08- MAG-03