Victoria Arduino Adonis+ 2 Gr, Техническое руководство

Страница: 64 / 136

62
EN
Before starting to use the appliance, the operator must be
sure to have read and understood the safety prescriptions
contained in this booklet.
The
model is equipped with a display
key T and a technical key U . With the display key T it
is possible to access the normal operating functions,
while programming menus can be seen but not modified
(
Chapter 7 ). The technician U key allows you to access
all the functions and to modify the parameters of the
programming menu.
6.1 COMMISSIONING PROCEDURE
OR AFTER BOILER MAINTENANCE
(T3 VERSION)
When commissioning the machine for the first time
or after carrying maintenance switch ON the machine
using the main switch positioned lower down and on the
right and proceed as follows:
①
If the message “OFF – CLOCK DISENABLED”
appears on the display proceed as follows in step
three.
② If the message “OFF” appears on the display
press the key until the message “OFF – CLOCK
DISENABLED” appears on the display and then
proceed as follows in step three.
③ Switch ON the machine by pressing the key and
automatically water will exit from the units for 45
seconds to ensure that the coffee boiler has been
correctly filled.
This cycle cannot and must not be interrupted.
If this cycle is interrupted due to an electricity
failure or accidental switching off of the machine
using the main switch, when the machine is
switched on again the cycle will start again for
another 45 seconds.
6.2 TURNING THE MACHINE ON
‡ Switch off the disconnector and set the main
switch " A " to “ I ”.
‡ The unlit display will read:
6. USE
OFF
Fig. 14
A