Victoria-05 VITTORIA 10, Инструкция по эксплуатации

Страница: 10 / 28

Victoria-05 Ltd.
10
10.2.1. Main user control panel.
To visualize every function from the display it is necessary to touch the respective icon. The blue arrow in the sub menu is for
returning to the previous screen. By pressing SAVE all corrections are saved. The left and right arrows are for decreasing and
increasing the value of the respective parameter.
Display symbol Description
00/00/0
Date display day/month/year
00 : 00
Hour display Hour : Minutes
Indoor temperature
The number in the rectangle displays the current (momentary) indoor temperature. The number
in the circle displays the temperature that is set to maintain in the room.
When the icon with the number of the indoor temperature is touched, an additional page would
open, where the user can set the preferred temperature(min.10
о
С-max.40
о
С).In the upper right
angle a sun symbol displays that the user sets the daily indoor temperature.
If a moon symbol displays, then the temperature to set
is for the night.
Entering the temperature is done through the Left and
Right icons. Saving the value is done by pressing Save.
After pressing it a green bar will be shown low down, which have to fill up, and then it would
disappear. This shows that the value has been saved correctly! During saving, access to the Back
Icon is denied to prevent involuntary interruption of the save process. The icon latter will re-
appear after the process has been finished.
If for more than 6 seconds - there is no connection to the Control Unit, the value will not be saved!
Day time and night time
temperatures
To change the required day and night temperature it’s necessary to touch the “house” icon. Sun
symbol for day time temperature and moon symbol for night time temperature. Additional page
will be displayed where the user can determinate the desired temperatures and hour range. When
touching the hour shown under the day and night icons a new page
is opened, where we can change the hour.
Day time is with range 4:00 till 17:00 h
Night time is with range 18:00 till 23:00 h
indoor fan
When the fan is not operational, the display icon is static. When the fan is operational, the icon
starts rotating. When started, in the rectangle next the icon is show AUTO that indicates for
automatic mode. During auto mode, the fan speed is controlled automatically depending from
the position in the programmed cycle. When the field is pressed, the numbers 1, 2 and 3 are
shown one after another. Every one of them is showing on which modulation we would like to
operate the fan.
Manual feed Pressing the icon activates the feed screw and remains in this mode until the icon is released. It is
visible only during “ready mode”. When the pellet stove is started, it will disappear!
Main menu and
service settings When the icon is touched, a new page with the main menu is opened.
10.2.2. Types of modes of the control unit.
Ready mode Warm up
Start Modulation (Р1,Р2 и Р3)
Feeding/Loading Cleaning
Ignition ECO mode