Victoria-05 VITTORIA 10, Инструкция по эксплуатации, Страница: 5 / 28

12.2018 INSTRUCTION MANUAL for installation and operation of pellet stove VITTORIA 8 / VITTORIA 10
5
Technical data and nominal performance:
Technical data
:
Performance parameters:
Vittoria 8 Vittoria 10
Nominal heat output 6.1 kW 8.0 kW
Reduced heat output 3.0 kW 3.7 kW
Maximum operating temperature 260
°
С 260
°
С
Distance to adjacent combustible materials side = 300 mm
rear = 300 mm
in front = 800 mm
Efficiency 87.76 % 85.87 %
СО emissions [13% О
2
]
at nominal heat output
at reduced heat output 0.0166 %
0.0281 % 0.0156 %
0.0291 %
Flue gases temperature
at nominal heat output
at reduced heat output 125
°
С
78
°
С
181
°
С
88
°
С
Flue gases mass
at nominal heat output
at reduced heat output 5.81 gr/s
2.96 gr/s 6.28 gr/s
2.98 gr/s
Draught
at nominal heat output
at reduced heat output 11 Ра
11 Pa 11.5 Ра
10.5 Pa
Duration of combustion
at nominal heat output
at reduced heat output 15h
34h 11h
28h
Fuel consumption minimum / maximum 0.7/1.525kg/h 0.867/2.067 kg/h
Type and dimensions of fuel Wood pellets, Ø 6 mm/length 25 mm
Pellet fuel hopper capacity 24 kg 24 kg
Flue socket diameter Ø 80 mm Ø 80 mm
Heating volume ≈ 120m
3
≈ 155 m
3
Net weight 103 kg 103 kg
The dimensions of the heated room are calculated based on pellets with calorific value not less than 4300 ccal/kg and heat loss of
heated room 33 ccal/m³h.Consideration must be given to the availability of external devices that can influence the operation of
the pellet stove.
All activities for repairing of electrical components, maintenance and / or inspections should be performed by qualified
personnel. Unplug the appliance from the main electrical supply before you start these activities.
Electrical data: Performance parameters:
Power supply 230 Vac (+/-10%), 50 Hz
Switch on / off Yes
Average power consumption 130 W
Average power consumption during ignition 430 W
Main power protection Fuse 4А, 250 VAC5 х 20
We reserve the right to make changes in products without prior notice, in order to improve their performance.
4. Safety devices.
Fume thermocouple: It is placed at the exit of the flue socket to measure the temperature of the flue gases. Controls ignition and
at very high temperature (260
0
C) triggers lock phase. Alarm (High Temp).
Vacuum gauge: It is placed at the exit of the flue socket. Account values of draught into the combustion chamber and compared
with the pressure in the room.
Temperature sensor of the pellet fuel hopper: Placed on the auger housing near the pellet fuel hopper. It interrupts feeding of the
pellets, if its temperature reaches 75°С.
Fuse: At the main switch of the pellet stove there is built in fuse.