Victoria-05 VITTORIA 10, Инструкция по эксплуатации

Страница: 17 / 28

12.2018 INSTRUCTION MANUAL for installation and operation of pellet stove VITTORIA 8 / VITTORIA 10
17
Activated timer Red color: the timer is activated and waiting for the set time
to stop the stove.
Activated timer Green color: the timer is activated and waiting for the set
time to start the stove.
If alarm icon is touched, the display will show the alarm menu. In descending order are shown the hour ant the type of
the alarm. In this menu, up to 10 alarms can be displayed. When the stove is re-started, the list is deleted!
14. Check list.
Location and installation:
- Ventilation of the room;
- Only the flue outlet of the pellet stove is connected to the chimney;
- Connecting flues pipes have a horizontal section with a length of 2 m, minimum slope of 3%, not more than two
curves at 90° and a vertical section with a length of less than 1.5 m;
- Connecting flues pipes are made of suitable material. It is recommended stainless steel;
Operation:
- Well dried and of good quality wood pellets. Diameter of Ø 6 mm and maximum moisture content of 8%;
- Chimney, connecting flue pipes and combustion chamber are clean;
- Flue outlet pipes are clean.
-
15. Frequently Asked Questions.
The following answers are tentative. For more details, use the instruction manual.
- What is need to prepare and do before installing the pellet stove?
Chimney with a diameter of at least 100 mm.
Opening for fresh air with a cross section not less than 80 cm
2
.
Power supply 230V (+/- 10%), 50Hz.
- Can the flue gasses be sent out directly through the wall?
NO. Removal must be in accordance with existing standards. For proper operation of the pellet stove the chimney (metal
or masonry) must be a minimum of 1.5 meters higher than the top of the roof. It must provide protection from wind.
- Is it required to ensure fresh air supply in the room?
- Yes, external air supply ensures fresh air for the burning process. Fume extractor pulls air from the room to the
combustion chamber.
- What settings does the control panel of pellet stove need?
Setting for the desired room temperature. Pellet stove will regulate the power to that temperature. The installer must
make the appropriate setting.
- How often the combustion chamber should be cleaned?
Before each ignition of the pellet stove, but only when it is turned off and cold.
-
May you clean the pellet fuel hopper with a vacuum cleaner?