Victaulic VicFlex AB12, Руководство по монтажу на месте

Страница: 95 / 204

I-VICFLEX_95
STYLE C-AQC BRACKET INSTALLATION FOR
CLEANROOM APPLICATIONS REV_A
ATTACHING THE STYLE C-AQC TO THE
CLEANROOM CEILING GRID
* Components provided by ceiling grid manufacturer
or others.
Exploded View of
Installation Components
Ceiling Grid*
Cross Block*
Sprinkler with Bulb Protector*
T-Bolt*
Gasket
Nut*
Bracket
Nut*
T-Bolt*
Completed
Installation
Flexible Hose
NOTICE
• If the sprinkler deflector or bulb protector appears too large to pass through the
cross block location, it may be necessary to install the sprinkler after the Style
C-AQC is tightened to the ceiling grid.
1. Slide a T-Bolt (supplied with the ceiling grid) into the slot of the two opposing
ceiling grid sections, as shown in the drawing above.
2. Insert the Victaulic
®
VicFlex
™
Style C-AQC assembly into the cross block location.
3. Align the holes in the swivel bracket of the Victaulic
®
VicFlex
™
Style C-AQC with the
T-Bolts. Secure the swivel bracket to the ceiling grid by installing a nut (supplied
with the ceiling grid) onto the end of each T-Bolt. To ensure a rigid connection,
tighten each nut completely.
4.
Install any ceiling grid face plates, sprinkler escutcheons, elastic decorative rings
or covers, etc. Use caution to prevent damage to the sprinkler during installation of
any accessories.
5. After installation is complete, test the system for leaks in accordance NFPA
guidelines or local code requirements.