18. DO NOT ALTER THE PFT510 VIC-PRESS
SCHEDULE 10S TOOL OR JAWS IN ANY
WAY. Alterations to any tool components
may result in improper product
installation and will void the Victaulic
warranty.
19. Store tools in a dry, secure area when not
in use.
20. Use only rechargeable batteries and
battery chargers supplied or authorized by
Victaulic.
21. Keep the battery away from metal objects
that can make a connection from one
terminal to another.
Shorting the battery
terminals may cause burns or a fire .
22. Avoid contact with batteries that may be
leaking.
Burns or skin irritation can occur
from contact with leaking batteries .
23. Do not use the tool, batteries, and the
battery charger at ambient temperatures
outside the ranges listed in this manual.
24. Do not dispose of batteries with normal
domestic waste.
Batteries must be
disposed of properly, in accordance with
local environmental requirements .
INTRODUCTION
NOTICE
•
Drawings and/or pictures in this manual
may be exaggerated for clarity.
•
The tool, along with this operating
and maintenance instructions manual,
contains trademarks, copyrights, and/or
patented features that are the exclusive
property of Victaulic.
The Victaulic PFT510 Vic-Press Schedule 10S
Tool is designed for joining only Victaulic Vic-
Press Schedule 10S System products with
ASTM A-312 Schedules 5S and 10S stainless
steel pipe (Types 304/304L or 316/316L)
in 1/2-inch/ 21 .3-mm, 3/4-inch/26 .9-mm,
1-inch/33 .7-mm, 11/2-inch/48 .3-mm, and
2-inch/60 .3-mm sizes .
The PFT510 must be equipped with the proper
size standard Vic-Press jaw or Vic-Press adapter
jaw/Vic-Press ring that corresponds with the size
of pipe and Vic-Press System Products being
installed .
The PFT510 is a Victaulic tool manufactured by
Klauke* for industrial and trade use only . Refer
to the back cover of this manual for the EC
Declaration of Conformity .
CAUTION
•
The PFT510 must be used only with
Victaulic Vic-Press Schedule 10S System
Products and stainless steel pipe, as
outlined in the “Introduction” section.
Failure to follow this instruction could cause
improper product assembly, resulting in
joint leakage, tool damage, and property
damage.
* Klauke is a registered trademark of the Textron Company
TM-PFT510_3
TM-PFT510
OPERATING AND MAINTENANCE INSTRUCTIONS MANUAL
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY.
REV_D