WARNING
•
Wear safety glasses when
working with compressed
air to prevent debris from
entering eyes.
Failure to follow this instruction could result
in serious personal injury.
2 . Clean the drive rollers and the locking pin
with a brush or compressed air .
Lubricate
Locking
Pin
Lubricate
Drive
Rollers’
Guide
Lubricate
Drive
Rollers
3 . Lubricate the drive rollers’ guide with a light
grease .
3a . Lubricate the drive rollers with a light
machine oil .
3b . Lubricate the locking pin with a light
machine oil .
4 . Clean plastic components (i .e . batteries, tool
housing, etc) with a mild soap and damp cloth .
DO NOT use cleaning solvents, turpentine, paint
thinners, etc . to clean plastic parts . DO NOT
immerse the tool in liquid .
5 . Remove deposits from the pressing cavities of
the standard Vic-Press jaws with a wire brush .
6 . Remove deposits from the pressing cavities of
the Vic-Press rings with a wire brush .
TM-PFT510_19
TM-PFT510
OPERATING AND MAINTENANCE INSTRUCTIONS MANUAL
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY.
REV_D
