OPERATOR SAFETY INSTRUCTIONS
Use of this tool requires dexterity and
mechanical skills, as well as sound safety
habits . Although this tool is manufactured for
safe, dependable operation, it is impossible to
anticipate all combinations of circumstances
that could result in an accident . The following
instructions are recommended for safe operation
of this tool . The operator is cautioned to always
practice “safety first” during each phase of
use, including setup and maintenance . It is the
responsibility of the owner, lessee, or user of this
tool to ensure that all operators read this manual
and fully understand the operation of this tool .
Read this manual before operating or
maintaining this tool . Become familiar with the
tool’s operations, applications, and limitations .
Be particularly aware of its specific hazards .
Store this manual in a clean area where it is
always readily available . Additional copies of this
manual are available upon request .
1. Avoid using the tool in dangerous
environments.
Do not expose the tool to
rain, and do not use the tool in damp or
wet locations . Do not use the tool near
flammable liquids and gaseous, explosive
environments . Keep the work area well lit .
Allow sufficient space to operate the tool
properly .
2. Inspect the equipment.
Before using
the tool, check all moveable parts for
any obstructions . Check for alignment
of moving parts, breakage, mounting
problems, and other conditions that may
affect tool or Vic-Press jaw operation . Do
not attempt to repair damaged Vic-Press
jaws .
3. Prevent accidental startups.
Do not carry
the tool with your finger on the trigger .
4. Wear proper apparel.
Do not wear loose
clothing, jewelry, or anything that can
become entangled in moving parts .
Non-skid footwear and rubber gloves are
recommended when working outdoors .
5. Wear protective items when working with
tools.
Always wear safety glasses, hardhat,
foot protection, and hearing protection .
6. Stay alert.
Do not operate the tool if you
are drowsy from medication or fatigue .
Avoid horseplay around the equipment .
7. Keep visitors away from the immediate
work area.
All visitors should be kept a safe
distance from the equipment at all times .
8. Keep work areas clean.
Keep the
work area around the tool clear of any
obstructions that could limit the movement
of the operator . Clean up any oil/spills .
9. Secure the work.
Use clamps, vices, or
pipe hangers to secure the work .
10. Keep hands and tools away from the Vic-
Press jaws during the pressing operation.
Avoid all pinch points .
11. Do not over-reach.
Maintain proper footing
and balance at all times .
12. Do not force the tool.
Do not force the tool
or accessories to perform any functions
beyond their capabilities . Do not overload
the tool .
13. Always remove the battery before
lubricating tool components.
Only
authorized personnel should lubricate tool
components .
14. Maintain tools with care.
Keep tools
clean at all times to ensure proper and
safe performance . Follow all maintenance
instructions . Do not lubricate tools with
flammable or volatile liquids, such as
kerosene, diesel fuel, etc .
15. Always operate, inspect, and maintain
the tool in accordance with all regulations
that apply to hand-held, battery-powered
tools.
16. Use only Victaulic or authorized
accessories.
Use of any other parts may
result in a voided warranty, improper
operation, and hazardous situations .
17. Do not remove any labels from the tool.
Replace any damaged or worn labels .
TM-PFT510_2
TM-PFT510
OPERATING AND MAINTENANCE INSTRUCTIONS MANUAL
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY.
REV_D