Vicon NOVA Powerplus VP3466, Руководство по программированию

Страница: 20 / 101

User Number
The user number identifies each user in the CCTV system for tracking purposes. Up to 32 users may be
assigned a user number in the Powerplus system.
Settings:
Keys: 01 to 32
Numeric keypad’s + (plus) key to increment
Numeric keypad’s (minus) key to decrement
ID
The identification number must be entered for each user in the system. The number must be 10 digits
or less. The ID must be entered each time the Powerplus menu system is accessed, as discussed in
Entering and
Exiting
Programming Screens on page 4.
Note: A ID should be set for each of 32 users in system. Otherwise, default ID of
“0000000000” will allow
access
to the system.
Settings: 1 O-digit number
Keys: Number keys across the top
Default:
0000000000
Privilege
A privilege level must be specified for each user ID. The Powerplus accepts up to 32 users, 3 of which
may have administrator privilege. Administrators may access all programming screens. Managers may
access all programming screens except for the Administration, System Diagnostics, and Install Default
Menus. Users with operator privilege are denied access to all programming screens.
At least one user must be assigned administrator privilege. An error message screen will display if the
Escape key is pressed and there is no user with administrator privilege. Refer to
Error
Messages,
Number of
Administrators on page 82 for more information.
Settings:
Keys:
Default:
Operator
Manager
Administrator
Numeric keypad’s + (plus) key or (minus) key
Operator
X897 Rev 1196 Nova Powerplus
Administration
l
9