Vicon NOVA Powerplus VP3466, Руководство по программированию

Страница: 79 / 101

Set Camera Partition
The procedure of assigning cameras to monitors is known as partitioning. By default, all cameras are
assigned to all monitors. Video from camera stations may not be displayed on monitors unless the camera
stations are partitioned to those monitors. Monitors are partitioned to keypads as discussed in Set
Keypad
Partitions on page 22. Keypads may only control a camera station if it has been partitioned to a monitor
which was in turn partitioned to that keypad.
Menu Path: Main Menu Video Switch Action Set Camera Partition
I
VS
MON
CAMERAS FOR MON. : 301
001 002 003 004 005 006
007 008 009 010 011 012
013 014 015 016 017 018
019 020 021 022 023 024
000: ENABLE, n a=: DISABLE
Cameras For Monitor
The monitor number is identified in the Cameras For Monitor setting. Enabling the cameras partitions them to
the monitor. Disabling the camera removes it from the partitioning table for the selected monitor. After
defining the monitor number, press the Tab key to move to the partitioning table.
Settings:
Keys:
01 to 32
Numeric keypad’s + (plus) key or (minus) key
Tab key to move from Cameras for Monitor setting to partitioning table
Partitioning Cameras to Monitors
The procedure of assigning cameras to monitors is known as partitioning. By default, all cameras are
assigned to all monitors, Video from camera stations may not be displayed on monitors unless the camera
stations are partitioned to those monitors. Monitors are partitioned to keypads as discussed in Set
Keypad
Partitions on page 22. Keypads may only control a camera station if it has been partitioned to a monitor
which was in turn partitioned to that keypad.
The monitor number is identified in the Cameras For Monitor setting. All 256 cameras are enabled as default,
which partitions all of them to the specified monitor. Disabling the camera removes it from the partitioning
table for the selected monitor. After defining the partition for the selected monitor, use the Tab key to return
to the Cameras for Monitor setting and select another monitor. Use the Tab key to return to the partitioning
table and continue this process until each monitor’s partitioning table has been defined.
Settings:
Keys:
Default:
Enabled
Disabled
Numeric keypad’s + (plus) key or (minus) key
Shift and numeric keypad’s (plus) key or (minus) key to set all cameras past cursor
Enabled
68
l
Video Switch Action X897 Rev 1196 Nova Powerplus