Vicon NOVA Powerplus VP3466, Руководство по программированию

Страница: 49 / 101

Sequence
Alarm monitors may be set to sequence multiple active alarm video or to display an alarm steadily until
acknowledged, in the order determined in
A/arm Order (Common Stack Only) on page 32 or Alarm
Order (Independent Stack on page 37. Choose Enabled to sequence the video from multiple active
alarms on the alarm monitor specified at the top of the screen.
Settings:
Keys:
Default:
Disabled
Enabled
Numeric keypad’s + (plus) key or (minus) key
Disabled
Dwell Time
As discussed in the previous section, alarm monitors may be set to sequence the video from multiple active
alarms, If sequencing is enabled, the dwell time must be set for the alarm monitor specified at the top of the
screen. The dwell time is the length of time that alarm video will display before being replaced by video from
the next alarm in the alarm monitor stack. The dwell time must be long enough to allow the pan-and-tilt drive
to move to the preset position and be viewed before the sequence proceeds to the next alarm.
Settings:
Keys: 001 to 240 seconds
Numeric keypad’s + (plus) key or (minus) key to increment/decrement by 1 second
Shift and numeric keypad’s + (plus) or (minus) key to
by 10 seconds
Auto Acknowledge
Alarms may be acknowledged manually or automatically. If Auto Acknowledge is Enabled, an alarm will
display until the acknowledge time passes, then the alarm will be automatically acknowledged by the system.
The acknowledge time is discussed in the following section. Manual acknowledgment by a user is required if
Auto Acknowledge is Disabled. Refer to
Models and intelligent Remote Control Panels
Manual manual acknowledgment procedures.
Settings:
Keys:
Default:
Disabled
Enabled
Numeric keypad’s + (plus) key or (minus) key
Disabled
Acknowledge Time
The acknowledge time is the length of time that alarm video will display before being automatically
acknowledged by the system. Acknowledgment removes the alarm from the alarm monitor stack. This setting
is unavailable if Auto Acknowledge is set to Disabled.
Settings:
Keys: 001 to 255 seconds
Numeric keypad’s + (plus) key or (minus) key to increment/decrement by 1 second
Shift and numeric keypad’s + (plus) or (minus) key to
by seconds
38
l
Alarm Actions
X897 Rev 1196 Nova Powerplus