background image

After enabling triggered events as discussed in the previous section, they must be defined by type and

identified by receiver or monitor number.

Menu Path: Main Menu 

 Administration 

 Set Triggered Events 

 Program Trgr Events

INPUT NUMBER :

001

EVENT TYPE

RECEIVER NO.

:

001

 CURSOR UP/DWN

CYCLE CHOICE

I

Input Number

The X-IA input numbers available for this menu item are the inputs which were enabled as discussed in 

Set

Triggered 

 

on page 16. The event type and other items on this screen must be defined for each X-IA

input number.

Settings:

001 to 256 (only X-IA inputs which are enabled as triggered events are available)

Keys:

Numeric keypad’s + (plus) key or   (minus) key

Event Type

Tours, salvos and presets define video switching functions and are available as triggered event types. The
Tour setting is used to select a video switching function defined as a series of preset video displays from
various camera stations on a specified monitor or on various monitors, depending upon the tour type. The

tour type may be monitor or salvo, as discussed in 

Select Tour Type 

on page 60. A group of monitors

displaying video from predefined camera stations may be defined as a Salvo. The Preset setting specifies
the pan, tilt, lens preset position and settings to be recalled when the event is triggered.

Settings:

Keys:
Default:

U n u s e d

Tour

Preset
Salvo
Numeric keypad’s + (plus) key or   (minus) key
U n u s e d

Pattern/Number

Events are identified using the input number setting discussed in 

 Number. 

Events are further

differentiated using a pattern or number identifier. Tours, salvos, and presets are identified using a number.

For example, preset 01 may be event 10. Note that even though 80 presets are available in the software, the
maximum number of presets available depends upon the specific model of the receiver used.

Settings:

Keys:

Presets:

001 t o 080

Tours:

001 t o 128

Salvos:

001 t o 064

Numeric keypad’s + (plus) key or   (minus) key

X897 Rev 1196 Nova Powerplus

Administration 

17

Содержание NOVA Powerplus VP3466






































































































Отзывы: