Copyright © VibroSystM Inc., 2011
6
General Safety Information - Rev. 1
●
•
Never operate this instrument with the cover removed or the case open.
•
Use caution when working with voltages above 30 V
AC
rms, 42 V
AC
peak, or 42 V
DC
, as these voltages
pose a shock hazard.
•
Use only the replacement fuse(s) specified by the manual.
•
Do not operate this instrument around explosive gas, vapor, or dust.
Safety and electrical symbols that appear in this manual and on this instrument:
Warning - Danger -
identify conditions or practices that could cause bodily harm, and result
in damage to the measuring chain and other equipment to which it is connected. Conditions
include a risk of electric shock (voltage > 30 V
DC
or V
AC
peak might be present).
Caution
- identify conditions or practices that could result in permanent loss of data.
Important information
IEC 5032 AC (Alternating Current)
GND or earth ground
Protective conductor terminal
Electronics common - not linked to earth ground
(Shield) cables shield-to-earth ground, frame or chassis terminal - linked to earth ground
Содержание STATE-200
