Copyright © VibroSystM Inc., 2011
17
STATE-200 Installation and Field Wiring_Rev. 0
●
•
Modules with a Type A casing do not use input signals
IN B Hi
or
IN B Lo
, and have only the head of the retaining screw on top.
•
Modules with a Type B casing have a small connector cable
attached to two additional screws on top for connection of input
signals
IN B Hi
and
IN B Lo.
Refer to
Table 1: “Input Modules Available,”
the type of casing for each model of input module.
On the backplane, a small DIP switch and two pins are assigned to
each module location.
•
The DIP switch must be set according to the model of the
module present at that location.
Refer to section
"3.5.1 Input wiring and DIP switch setting"
page 18 for details.
•
The two pins are used with some types of input modules for
connection of input signals
IN B Hi
and
IN B Lo
.
Содержание STATE-200
