VibroSystM STATE-200, Руководство по установке

Страница: 26 / 32

Copyright © VibroSystM Inc., 2011
26 Troubleshooting the STATE-200 Unit_Rev. 0
●
When operation is optimal, all status indicators appear as , and the message indicates Signal in range ,
as on the following screen capture.
If the ZOOM Look service shows the status associated to the STATE-200 unit, with the message Acqui-
sition Unit Not OK , one of the following problems may have occured:
•
the configuration does not contains the correct IP address
•
the DHCP server has changed the STATE-200 address