VibroSystM STATE-200, Руководство по установке

Страница: 31 / 32

Copyright © VibroSystM Inc., 2011
31 STATE-200 Extension Unit_General Specifications - Rev. 0
●
6. STATE-200 Unit - General Specifications
6.1 Electrical Characteristics
COMMUNICATION PORT
- Type Ethernet
- Connector RJ-45
- Protocol TCP/IP
- Speed 100 Mbps (10/100 Base T Standard)
- Maximum cable length 100 m (328 ft.) with 6 STP Category cable
ANALOG INPUT MODULES
•
External input connectors 16 removable 7-position mini screw terminals
•
24V
DC
Power Output (1 per channel):
- I
Out
max. (per channel) 200 mA
- I
Out
max. (16 channels) 1,0 A
Table 1: Input Modules Available
Input Range Model
Wiring Diagram
(Section 3.7 - Input Modules)
Type
Voltage DC — Input-to-output isolation: 4000Vrms; Input-to-analog supply (T models): 4000Vrms; 60 % of scale change in 165ms
0 to 50 mV
DC
isolated
0 to 100 mV
DC
isolated
0 to 5 V
DC
0 to 5 V
DC
isolated
-5 to +5 V
DC
-5 to +5 V
DC
isolated
0 to +10 V
DC
-10 to +10 V
DC
-10 to +10 V
DC
isolated
AD9T
AD13T
AD6
AD6T
AD11
AD11T
AD7
AD12
AD12T
5
5
6 & 7
6 & 7
6 & 7
6 & 7
6 & 7
6 & 7
6 & 7
B
B
A
A
A
A
A
A
A
Voltage AC — Input to logic output isolation: 4000Vrms ; Module-to-Module isolation: 1500Vrms; Full scale change in 1.5sec
28 to 140 V
AC
isolated
AD15T 2 B
Current — Input-to-output isolation: 4000Vrms; Input-to-analog supply (T models): 4000Vrms; Full scale change in 3ms
0 to 20 mA isolated
4 - 20 mA
4 - 20 mA isolated AD2T
AD3
AD3T 3 & 4
3 & 4
3 & 4 A
A
A
Temperature (RTD) —Isolation transient: Input-to-output : 4000Vrms; Input-to-analog supply: 4000Vrms; Full scale step change in 100ms
3-wire 100
Ω
RTD
PT100 _ isolated
4-wire 10
Ω
RTD
CU10_ isolated
-50° to +350°C (-58° to + 662°F)
-55° to +150°C (-67° to + 302°F)
AD10T2
AD14T
10 & 11
8 & 9
B
B
Contact Closure (switch, relay or other) — contact closure shorting logic input to ground ;
0 to +10 V
DC
(5V input bias through internal pull-up resistor) AD7 1 A